Setting The Displayed Language; Setting The Time And Date; Sensor Status Menu; Sensor Setup Menu - Hach sc1000 User Manual

Operation

5.1.6 Setting the Displayed Language

5.1.7 Setting the Time and Date

5.2 Sensor Status Menu

Select Sensor—A list of choices is displayed depending on the sensors attached to the controller.
ERROR LIST
Displays a list of errors currently present in the sensor. Refer to the appropriate sensor manual for more information.
WARNING LIST
Displays a list of warnings currently present in the sensor. Refer to the appropriate sensor manual for more information.

5.3 Sensor Setup Menu

网址：www.mamots.com
46
To configure the displayed language:
1. From the System Setup Menu, select Display Settings and Language.
2. Select the highlighted language. From the list box, highlight the Language to display
on the screen and select the
button.
CANCEL
To configure the Time and Date and the date format:
1. From the System Setup Menu, select Display Settings and Date/Time.
Selecting the Date Format
a. Select Format and press on the highlighted format on the far-right. From the list
box, highlight the date format to be displayed and press the
confirm the selection and return to the Date/Time screen.
Entering the Date
b. Select Date and press on the highlighted date on the far-right. The keypad will be
displayed. Enter the date using the keypad and press
change and return to the Date/Time screen.
Entering the Time
c. Select Time and press on the highlighted time on the far-right. The keypad will be
displayed. Enter the time using the keypad and press
change the return to the Date/Time screen.
The sensors connected and registered are listed in the Sensor Setup Menu. If the entry is
displayed in red, an error has been detected.
Refer to the appropriate sensor manual for sensor specific menu information.
button to confirm the selection or select the
ENTER
客服：400 688 9809
button to
ENTER
to confirm the
ENTER
to confirm the
ENTER
电话：0431-85178766