Mounting The Controller; Wall Mounting The Controller; Horizontal And Vertical Pipe Mounting - Hach sc1000 User Manual

3.2 Mounting the Controller

3.2.1 Wall Mounting the Controller

Figure 3 sc1000 Controller Mounting Features
6.7 mm
( 0.26 inches) (4)
M6 x 12.5 mm
(M6 x 0.5 inches)

3.2.2 Horizontal and Vertical Pipe Mounting

网址：www.mamots.com
The optional sun-shield is highly recommended for all outdoor installation. Refer to the
instruction sheet supplied with the sun shield for installation instructions.
Leave a minimum of 5 cm (2 in.) of space at the top and sides for cooling purposes and
display module installation. Leave a minimum of 15 cm (6 inches) of space underneath for
the cable connections. Refer to
1. Install the four supplied bolts into the wall.
2. Hang the sc1000 controller system over the bolts and attach the supplied washers
and hand-tighten the two bottom bolts.
50 mm (2.0 inches)
minimum clearance
254 mm (10.00 inches)
Refer to Figure 4 and Figure 5 on page 12
on pipe mounting refer to the instructions supplied with the mounting kit.
Figure 3 for proper wall mounting dimensions.
80 mm
(3.16 inches)
315 mm (12.28 inches)
for mounting descriptions. For more information
Installation
客服：400 688 9809
80 mm
(3.16 inches)
电话：0431-85178766
11