Using The Device List - Hach sc1000 User Manual

5.1.2.2 Using the Device List

Figure 36 Device List
1
2
1. Display Area—shows all sensors and devices
connected to the sc1000 network
2. Pop-up Tool Bar (displayed when bottom of screen is
touched)
3. Scrolls up through the list.
Figure 37 Measurement Value Display List Box
1
2
1. Device List (shows all sensors and devices connected to the sc1000 network)
2. Measurement Value Display List (shows the sensor and device output values selected for display on the main screen)
3. Confirms a selection and returns to the device list.
4. –copies the selected entry from the device list to the measurement value display.
ADD
5. –deletes the selected entry in the measurement value display.
REMOVE
6. Scrolls up
7. Scrolls down
网址：www.mamots.com
1 2 4
4. Switches to the measurement value display list box
(Figure
5. Scrolls down through the list.
3 4
DEVICE LIST
MEASUREMENT VALUE DISPLAY
客服：400 688 9809
37).
5
电话：0431-85178766
Operation
3
4
5
6
7
6
7
41