Warning And Error Conditions; Device Scan Information - Hach sc200 User Manual

Option Description
Output cal Calibrate 4 mA output (Min: 0 Max: 25000)
Calibrate 20 mA output (Min: 35000 Max: 65533)
• Output 1
• Output 2
Hold outputs Set activation—Launch or release
Set Outmode—Hold Outputs (default) or Transfer
Outputs
Set Channels—All (default) or select from hardware
list
Test output Min: 0 mA (default +04.00)
Max: 25.00 mA
• Output 1
• Output 2
Status View status of all modules, sensors and relays.
Test relay—A, B, C, D Energize or De-energize the selected relay
Overfeed reset Resets the Overfeed Timer.
Reset default config Resets controller configuration settings to default
values
Restart sc200 Performs a controller restart
Simulation (only Source-
displays if sensors or
• <Module 1>
modules are
connected) • <Module 2>
(Footer displays current source selection)
Parameter—Source measurement type (footer
displays current source selection)
Sim value—Use arrow keys to change value (footer
displays current source selection)
Option Description
Modbus stats Displays Error and Good count stats for selected
port.
• Sensor port 1, 2, 3 or 4
• Network port
• Service port
• Clear stats
System data Displays the current system current, temperature
and voltage data.

Warning and error conditions

Follow the steps below to acknowledge controller warnings.
1. From the Settings menu, select Diagnostics and push ENTER.
2. Select the device (controller, sensor, network card) with the warning
or error and push ENTER.
3. Select the warning, error or event list and push ENTER.
4. Select Yes and push ENTER to acknowledge the warning.
Note: Errors cannot be acknowledged.
5. For more information on a specific warning, error or event, refer to the
device manual.

Device scan information

Display message
Installing device...please wait
Action
The controller has found a new device.
No action is necessary. The controller
automatically performs an installation
process for the new device and displays
the main measurement screen of the
device installed in the number one
position.
English 37