Section 2 Operation; Operating The User-Programmable Setup; Moving Around The Menu; Editing A Setup Value - Hach EC1000 Instruction Manual

SECTION 2 OPERATION

2.1 Operating the User-Programmable Setup

2.1.1 Moving Around the Menu

2.1.2 Editing a Setup Value

The EC1000 Controller is a menu-operated instrument. In the setup menu, each of
the instrument settings are grouped into submenus of common settings. For user
programming, move to the desired setting, and edit the current value. Refer to
Table 18 on page 99, which describes operation of the Diagnostic Test Menu.
After pressing the
SETUP
scroll through the top level menu to the desired entry. Use the
into a submenu (use the
CLEAR
desired setting is displayed, press the
and change the value as needed. (Exit the menu at any time by pressing the
Example—checking or changing the ALARM2, SET PoiNT:
1. Press to enter the SETUP menu.
SETUP
2. Press to move into the ALARMS submenu.
ENTER
3. Press the
DOWN ARROW
4. Press to move into the ALARM2 submenu.
ENTER
5. Press the
DOWN ARROW
6. Press to display the ALARM2 set point.
ENTER
Two types of setup data require editing. The first is a number entry such as an alarm set
point. Any value in the set point range can be entered. When the number entry is selected
first, the first digit space displays a flashing
key alternates between the two signs. Pressing the
ARROW
the first digit. This digit flashes indicating that it can be edited. Pressing the
key increases the digit value, and pressing the
The remaining digits are changed by repeating this process. When the whole number is
changed to the desired value, press the
during the editing process, the original value is restored by pressing the
key to enter the menu, use the
key to back up to the next higher menu level). Once the
key to display the current value of the setting,
ENTER
key to scroll to the ALARM2 entry.
key to scroll to the SET PoiNT entry.
or sign character. Pressing the
+ –
DOWN ARROW
key to save the new value. At any time
ENTER
25
and keys to
UP DOWN ARROW
key to move down
ENTER
pH/mV
or
UP
key moves to
RIGHT ARROW
UP ARROW
key decreases the digit value.
key.
CLEAR
key.)
DOWN