Table of Contents
Advertisement
camera picture to draw a virtual region.
7. Click Save to save your settings.
8. If you want to modify the position or sharp of region, click the red box in the region, the borders
of the region will be changed to red color. Click and hold the left button of your mouse to move
the position of the region, or drag the corners to resize the region.
9. If you want to remove one of the regions from the camera picture, click the red box in the region
and then click Remove button. Click Remove All will delete all regions.
5.4.1.9 Schedule
In order to active the AI function, you need to config the schedule. The schedule will be active in 24
hours x 7 days.
To set the schedule, choose one channel then click on one of the detection items on the right side,
then drag the cursor to mark the slots. The schedule is valid only for the selected channel each time
when you set. If you want to use the same schedule for other channels, use Copy function. Click Save
to save your settings.
5.4.2 Recognition
The system supports face recognition only, you would need to configure the face recognition
algorithm model and database .
5.4.2.1 Model Configuration
To choose the face algorithm model. Auto select recognition model is recommended.
73 English
Advertisement
Table of Contents
