Cc (Cross Counting Detection) - Grundig GU-RN-AC8104P User Manual

or drag the corners to resize the region.
5. If you want to remove one of the regions from the camera picture, click the red box in the region
and then click Remove button. Click Remove All will delete all regions.
For Alarm setup, please refer to

5.1.9.5 CC (Cross Counting Detection)

Cross Counting function counts the times for moving objects or people across the virtual lines.
Switch: Check the box to enable CC function.
Sensitivity: Set the sensitivity level. Level 1 the lowest sensitivity level while level 4 is the highest
sensitivity level.
Click Setup icon to draw a virtual line in the camera image.
Channel: Select the channel you want to configure
Rule Number: Max. 4 rules available.
Rule Switch: Activate or inactivate the rule
1. To enable the detection in Rule Switch.
2. Choose a Rule Type.
A→B: If a target object is detected moving from side A to side B, the system will count 1 to enter
number; if a target object is detected moving from side B to side A, the system will count 1 to exit
number.
B→A: If a target object is detected moving from side B to side A, the system will count 1 to enter
number; if a target object is detected moving from side A to side B, the system will count 1 to exit
5.1.9.1.1 Alarm Setup
46 English