Table of Contents
Advertisement
number.
3. Use your mouse to click 2 points in the camera picture to draw a virtual line.
4. Click Save to save your settings.
5. If you want to modify the position or length of the line, click the red box in the line, the color of
the line will be changed to red color. Long press the left button of your mouse to move the line, or
drag the terminals to modify the length or position of the line.
6. If you want to remove one of the lines from the camera picture, click the red box in the line and
then click Remove button. Click Remove All will delete all lines.
For Alarm setup, please refer to
5.1.9.6 SD (Sound Detection)
With the sound detection, it can trigger an alarm while detecting the sound rise or decline, and some
certain actions can be taken when the alarm is triggered.
Switch: enable or disable sound detection.
Rise: enable or disable sound rise detection.
Rise Sensitivity: Set the sensitivity level. Level 1 the lowest sensitivity level while level 100 is the
highest sensitivity level.
Sound Intensity: set a threshold of sound intensity, the lower value, the more sensitivity.
Decline: enable or disable sound Decline detection.
Decline Sensitivity: Set the sensitivity level. Level 1 the lowest sensitivity level while level 100 is the
highest sensitivity level.
For Alarm setup, please refer to
5.1.9.1.1 Alarm Setup
5.1.9.1.1 Alarm Setup
47 English
Advertisement
Table of Contents
