Cc (Cross Counting) - Grundig GU-RN-AC8104P User Manual

5.4.1.5 CC (Cross Counting)

Cross Counting function counts the times for moving objects or people across the virtual lines.
Switch: Check the box to enable the function.
Sensitivity: Set the sensitivity level. Level 1 the lowest sensitivity level while level 4 is the highest
sensitivity level.
Click Setup icon to configure the detection conditions.
Channel: Select the channel you want to configure
Type: Choose the detection target objects. Motion will detect all moving objects, Person will detect
human beings only, Vehicle will detect vehicles only.
Alarm Number: The NVR will send an alert if the number of entries minus the number of exits
exceeds the alarm number. E.g., the number of entries is 601 while the number of exits is 400, and
the alarm number you set is 200, 601-400＞200, then the NVR will send an alert.
68 English