Table of Contents
Advertisement
Motion: When the time slot is marked yellow, this indicates the channel capture images when a
motion is detected during that time slot.
IO: When the time slot is marked red, this indicates the channel capture images when the sensor is
triggered during that time slot.
PIR: When the time slot is marked purple, this indicates the channel capture images when the PIR is
triggered during that time slot.
No Capture: A time slot marked black means that it won't capture any images for the time slot, but
you can manually capture images if you enable the manual capture function in the channel.
5.3 Alarm
In this section, you can configure the alarm actions when alert occurs.
5.3.1 Motion
Channel: Channel name
Buzzer: The NVR can use its internal buzzer to emit an alarm tone. You can set the buzzer duration in
seconds when an alarm is triggered.
Alarm Out: Optional function. If your NVR support to connect to external alarm device, you can set to
emit an alarm tone.
Latch Time: To configure the external alarm time when motion is detected.
Record: Click
icon and choose which channel(s) you want to record when an alarm is triggered.
Post Recording: You can set how long after an event occurs that the NVR will continue to record. The
recommended recording length is 30 seconds but it can be set higher up to 5 minutes.
Show Message: Check the box to display
icon on the live view screen when an alarm is triggered.
Send Email: You can let the NVR to send you an auto-email when an alarm is triggered.
FTP Picture Upload: To upload alarm images to FTP server when an alarm is triggered. To enable FTP,
please view.
FTP Video Upload: To upload alarm video to FTP server when an alarm is triggered. To enable FTP,
please view
5.4.4
FTP.
Picture to Cloud: To upload alarm images to Cloud server when an alarm is triggered. To enable
Cloud, please view
5.6.2 Cloud.
53 English
Advertisement
Table of Contents
