Table of Contents
Advertisement
Full Screen: If this function is enabled and an alarm is triggered in a channel, you will see that channel
in full screen.
Voice Prompts: If your NVR or IP camera connects with a speaker, you can select an customized alert
voice when the alarm happens for different time period. See how to add customized alert voice on
5.3.8 Voice Prompts.
5.4.3.5 LCD (Line Crossing Detection)
To configure alarm actions for LCD alarms.
Buzzer: The NVR can use its internal buzzer to emit an alarm tone. You can set the buzzer duration in
seconds when an alarm is triggered.
Alarm Out: Optional function. If your NVR support to connect to external alarm device, you can set to
emit an alarm tone.
Latch Time: To configure the external alarm time when an alarm is triggered.
Record: Click
icon and choose which channel(s) you want to record when an alarm is triggered.
Post Recording: You can set how long after an event occurs that the NVR will continue to record. The
recommended recording length is 30 seconds but it can be set higher up to 5 minutes.
Show Message: Check the box to display "S" icon on the live view screen when an alarm is triggered.
Send Email: You can let the NVR to send you an auto-email when an alarm is triggered.
FTP Picture Upload: To upload alarm images to FTP server when an alarm is triggered. To enable FTP,
please view
5.4.4
FTP.
FTP Video Upload: To upload alarm video to FTP server when an alarm is triggered. To enable FTP,
please view
5.4.4
FTP.
Picture to Cloud: To upload alarm images to Cloud server when an alarm is triggered. To enable
Cloud, please view
5.5.2 Cloud.
Video to Cloud: To upload alarm video to Cloud server when an alarm is triggered. To enable Cloud,
please view
5.5.2 Cloud.
Full Screen: If this function is enabled and an alarm is triggered in a channel, you will see that channel
in full screen.
81 English
Advertisement
Table of Contents
