Table of Contents
Advertisement
Switch: Check the box to enable the QD function.
Sensitivity: Set the sensitivity level. Level 1 the lowest sensitivity level while level 4 is the highest
sensitivity level.
Click Setup icon
to configure the detection conditions.
Min Pixel: Set the minimum detection pixel box. The people can be recognized only when he/she is
larger than the pixel box.
Max Pixel: Set the maximum detection pixel box. The people can be recognized only when he/she is
smaller than the pixel box.
Max Detection: The NVR will send an alert if the number of crowds in the line inside the detection
area exceeds the Max Detection number.
Max. Pro Time: The NVR will send an alert if the stagnation time of the queue is longer than the
given processing time.
Dynamic Marking：If you enable this option, the border of the detection zone will be displayed in
both live view images and recording files.
1. Set the min. pixel and max. pixel.
2. Set the limitation number in Max. Detection.
3. Set the limitation number in Max. Pro Time, the unit is second.
4. To enable the detection in Rule Switch.
5. Set the Detection Range to be full screen or customize.
6. If you choose customized detection range, you will need to use your mouse to click 8 points in the
72 English
Advertisement
Table of Contents
