Table of Contents
Advertisement
3.
Check the Enable box to activate the group.
4.
Set the Capacity number, Start Time, End Time of each group.
5.
Choose the detection target Type from Person, Vehicle and Motion.
6.
Click one of the Alarm icons
Buzzer: Set the buzzer duration in seconds when the Available number is 0.
Alarm Out: If your NVR support to connect to external alarm device, you can set to emit an alarm
tone.
Latch Time: To configure the external alarm time when the Available number is 0.
7.
Click the close icon
then click Apply button to save the settings.
8.
Click the Group View icon
will be not allowed to add to any group.
to configure the alarm actions when the Available number is 0.
or right click your mouse to go back to previous configuration page, and
to view the live images & counting data of all activated groups.
135 English
Advertisement
Table of Contents
