Table of Contents
Advertisement
1.
If you want to activate this function, check the Enable box.
2.
Choose either Enable Allow List or Enable Block List. Allow List will only allow those IP address
in the list to visit the NVR. Block List will block those IP address in the list to visit the NVR.
3.
Choose one of the Restricted Types you want to set.
4.
Set the Start IP address and End IP Address.
5.
Click Single Add to add individual IP address.
6.
Click Network Segment Add to add the IP range from the start IP address to the end IP address.
7.
Click Edit
icon to edit the IP address.
8.
Click Delete icon
delete multiple IP address at one time.
5.5.6 Voice Assistant
The voice assistant function allows to connect your NVR to your GoogleCast or Amazon Fire TV Stick,
and cast the real-time surveillance images to your TV monitor by voice control.
5.5.6.1 Voice Assistant with Amazon Fire TV Stick
1. Input your Amazon account, and the click Bind button to connect to bind your Amazon account. To
choose the video stream you want to cast to your TV monitor.
to delete the IP address. Choose multiple IP address, and click Remove IP to
93 English
Advertisement
Table of Contents
