Ad (Attribute Detection) - Grundig GU-RN-AC8104P User Manual

Channel: Select the channel to set its capture parameters.
To set the schedule, choose one channel then drag the cursor to mark the slots. The blue blocks in
the time slots will be active for alarm. The schedule is valid only for the selected channel each time
when you set. If you want to use the same schedule for other channels, use Copy function. Click Save
to save your settings.

5.4.3.2 AD (Attribute Detection)

Attribute detection is a function to detect people's facial features and send an alarm according to the
settings.
Alarm Type: Select the alarm trigger condition. If the selection is "No Mask", the NVR will send an
alarm if it detects a person doesn't wear a face mask. If the selection is "Wear Mask", the NVR will
send an alarm if it detects a person wears a face mask.
Buzzer: The NVR can use its internal buzzer to emit an alarm tone. You can set the buzzer duration in
seconds when an alarm is triggered.
Alarm Out: Optional function. If your NVR support to connect to external alarm device, you can set to
emit an alarm tone.
Latch Time: To configure the external alarm time when an alarm is triggered.
Record: Click icon and choose which channel(s) you want to record when the alarm is triggered.
78 English