Mercedes-Benz G-Class Owner's Manual page 99

96
Seats and stowing
Pull the release handle 2 upwards until the
#
seat backrest is completely unlocked.
Fold the seat backrest forwards.
#
Folding back the rear bench seat
* NOTE Damage caused by trapping the
seat belt when folding back the seat
backrest
The seat belt could become trapped and thus
be damaged when the seat backrest is folded
back.
Make sure that the seat belt is not trap‐
#
ped when folding back the seat back‐
rest.
Swivel seat backrest 1 back until it
#
engages.
Swivel the seat cushion 2
#
Rear seat backrests
Adjusting the angle of the rear seat backr‐
ests
& WARNING Risk of accident if the rear
bench seat, rear seat and seat backrest
are not engaged
The rear bench seat, rear seat and seat back‐
rest may fold forwards, even while the vehi‐
cle is in motion.
As a result, the vehicle occupant will be
R
pressed into the seat belt with increased
force. The seat belt will not be able to
protect as intended and could cause
additional injury.
Objects or loads in the boot or load com‐
R
partment cannot be restrained by the
seat backrest.
Make sure that the rear bench seat, the
#
rear seat and the seat backrest are
engaged before every trip.
back.