Mercedes-Benz G-Class Owner's Manual page 147

144 Driving and parking
Active Lane Keeping Assist
R
Cruise control
R
Limiter
R
Active Brake Assist
R
Attention Assist
R
®
ESP trailer stabilisation
R
Selecting the drive program
Press DYNAMIC SELECT switch
#
or backwards.
The selected drive program appears in the
multifunction display and media display.
Selecting the drive program ë
Change the ; drive program.
#
Press and hold the DYNAMIC SELECT switch
#
1 backwards for approx. three seconds.
A message is shown in the multifunction dis‐
play and a warning tone sounds.
drive program ë is selected.
Confirm the message with the left touchpad
#
on the steering wheel.
The Desert drive progr. active ESP unavaila-
ble See Owner's Manual
the multifunction display. The ESP
warning lamps light up.
%
Observe the notes on the Desert ESP
( page 171).
/
% A message appears again and a warning
tone sounds when the driver's door is
opened while the engine is running to draw
attention to restricted road suitability in case
1 forwards
of a change of drivers.
Press the DYNAMIC SELECT switch
#
wards to deactivate the ë drive program.
ë (Desert) % The A drive program is automatically
active after starting the vehicle.
message appears in
®
and ABS
®
1 for‐