Mercedes-Benz G-Class Owner's Manual page 400

Using the wheel wrench, loosen the wheel
#
bolts on the wheel you wish to change by
about one full turn. Do not unscrew the bolts
completely.
& WARNING Risk of injury from incorrect
positioning of the jack
If you do not position the jack correctly at
the appropriate jacking point of the vehicle,
the jack could tip with the vehicle raised.
Only position the jack at the appropri‐
#
ate jacking point of the vehicle. The
base of the jack must be positioned
vertically under the jacking point of the
vehicle.
* NOTE Vehicle damage from the jack
If you do not position the jack correctly at
the appropriate jack support point of the
vehicle, the jack could tip over with the vehi‐
cle raised.
The jack is designed exclusively for
#
jacking up the vehicle at the jack sup‐
port points.
Wheels and tyres 397
Raising the vehicle at the front
Make sure that the adapter is secured on the
#
jack.
Position jack 4 on the comfort bushing on
#
transverse link 5.
Raise the vehicle by pumping until the tyre is
#
no more than 3 cm off the ground.
Loosen and remove the wheel (
#
page 398).
/