Mercedes-Benz G-Class Owner's Manual page 150

Use the DIRECT SELECT lever to switch the
transmission position. The current transmission
position is displayed in the multifunction display.
j Park position
k Reverse gear
i Neutral
h Drive position
Engaging reverse gear R
Depress the brake pedal and push the
#
DIRECT SELECT lever upwards past the first
point of resistance.
% You can shift from h to k and from k to
h without having to depress the brake
pedal.
Engaging neutral N
Depress the brake pedal and push the
#
DIRECT SELECT lever up or down to the first
point of resistance.
Subsequently releasing the brake pedal will
allow you to move the vehicle freely, e.g. to push
it or tow it away.
Proceed as follows if you want the automatic
transmission to remain in neutral i
the ignition is switched off or the driver's
door is opened:
Start the vehicle.
#
Depress the brake pedal and engage neutral
#
i when the car is stationary.
The message
vehicle rolling
cluster.
Release the brake pedal.
#
Switch the ignition off.
#
% If you then exit the vehicle leaving the key in
the vehicle, the automatic transmission
remains in neutral i.
Engaging park position P
Observe the notes on parking the vehicle
#
( page 160).
/
Depress the brake pedal until the vehicle is
#
stationary.
i even if When the vehicle is stationary, press button
#
j.
When the transmission position display
shows j, the park position is engaged. If no
transmission position display j appears,
secure the vehicle to prevent it from rolling
away.
Driving and parking 147
N permanently active Risk of
appears in the instrument