Mercedes-Benz G-Class Owner's Manual page 112

Operating the combination switch for the
lights
1 High beam
2 Turn signal light, right
3 Headlamp flashing
4
Turn signal light, left
Use the combination switch to activate the
#
desired function.
High beam
To switch on: turn the light switch to the
#
L or à position.
Push the combination switch beyond the
#
point of resistance in the direction of arrow
1.
When the high beam is activated, the indica‐
tor lamp for low beam L will be deactiva‐
ted and replaced by the indicator lamp for
high beam K.
To switch off: move the combination switch
#
back to its starting position.
Headlamp flashing
Pull the combination switch in the direction
#
of arrow 3.
Turn signal light
To indicate briefly: push the combination
#
switch briefly to the point of resistance in the
direction of arrow 2 or 4.
The corresponding turn signal light will flash
three times.
Light and sight 109
To indicate permanently: push the combi‐
#
nation switch beyond the point of resistance
in the direction of arrow 2
Activating/deactivating the hazard warning
lights
Press button 1.
#
or 4.