Mercedes-Benz G-Class Owner's Manual page 376

Open the lock on cover ring
#
driver 4.
Fold tab 3 down.
#
Pull cover ring 1 apart and remove it.
#
Remove cover panel 2.
#
Removing the spare wheel
Remove wheel nuts 5.
#
Remove the spare wheel.
#
1 with screw‐
Securing the wheel to the spare wheel
bracket
Use nuts
#
spare wheel bracket. Specified tightening
torque: 20 Nm
Position cover panel
#
that retainer
in recess 7.
Attach cover ring
#
lock.
% Make sure that the lock does not cover the
reversing camera. If necessary, turn cover
ring 1
5 to secure the faulty wheel to the
2 again. Make sure
6 of cover panel 2 engages
1 again and close the
slightly.
Breakdown assistance 373
Vehicles with an emergency spare wheel:
observe the notes on the emergency spare
wheel.
Spare wheel bracket with protective tyre
cover
Removing the protective tyre cover
Pull protective tyre cover 1
#
apart and remove it
on the rear side