Partitioning net without load compartment enlarge‐
ment
Partitioning net with load compartment enlarge‐
ment
Extend and unfold the partitioning net.
#
The joints on the top and bottom guide rods
will audibly engage.
To attach: attach the guide rod
#
roof lining to the holders 2.
Engage the hooks
#
4
on the left and right.
Pull on the loose ends of the lashing straps
#
until the partitioning net is tight.
After driving a short distance, check the ten‐
#
sion of the partitioning net and re-tension it if
necessary.
1
on the
Seats and stowing
99
3
in the tie-down eyes