Mercedes-Benz G-Class Owner's Manual page 60

O The child restraint system must not be put
under strain by the head restraint. Adjust
the head restraints accordingly.
° When fitting an i‑Size child restraint sys‐
tem, also observe the following:
O When using a rearward-facing child
restraint system: adjust the front seat so
that it does not touch the child restraint sys‐
tem.
O When using a forward-facing child
restraint system: remove the head
restraint from the respective seat, if possi‐
ble. In addition, the backrest of the child
restraint system must lie as flat as possible
against the backrest of the vehicle seat.
After the child restraint system has been
removed, replace the head restraint immedi‐
ately and adjust all head restraints cor‐
rectly.
1 ISOFIX mounting bracket
2 i‑Size mounting bracket
Before every journey, make sure that the ISOFIX
child restraint system or the i‑Size child restraint
system is engaged correctly in both mounting
brackets in the vehicle.
Occupant safety
* NOTE Damage to the seat belt for the
centre seat during installation of the
child restraint system
Make sure that the seat belt is not trap‐
#
ped.
Attach the ISOFIX or i‑Size child restraint sys‐
#
tem to both mounting brackets in the vehicle.
Securing a Top Tether
& WARNING Risk of injury or death if the
rear seat backrests are not locked after
fitting Top Tether belts
The rear seat backrests can fold forwards.
As a result, child restraint systems can no
longer perform their intended protective
function. In addition, further injuries may be
caused.
Always lock rear seat backrests after
#
fitting Top Tether belts.
57