Table of Contents
Advertisement
/ACCESS=access
/NOACCESS (D)
Specifies an access string (that is, a password). All application programs (clients
and servers) must specify the same access string for a given facility.
/BE_CALL_OUT
/NOBE_CALL_OUT (D)
Specifies that the RTR_F_OPE_BE_CALL_OUT flag is set in the
in the call to
rtr_open_channel( )
server.
/CHANNEL_NAME=channel-name
/CHANNEL_NAME=RTR$DEFAULT_CHANNEL
Specifies the name of the window's channel for use in subsequent operations on
this channel.
is not case sensitive. The default channel name is
channel_name
RTR$DEFAULT_CHANNEL.
/CLIENT
/NOCLIENT
Specifies that the RTR_F_OPE_CLIENT flag is set on the call to
rtr_open_channel( )
. The channel is opened as a client.
/CLUSTER
/NOCLUSTER (D)
Specifies that the command is executed on all the nodes in the cluster.
If neither
nor
/NODE
/CLUSTER
nodes specified by the latest
command has been entered then the command is executed only on the node where
the command was issued.
Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/CONCURRENT (D)
/NOCONCURRENT
Specifying /NOCONCURRENT sets the RTR_F_OPE_NOCONCURRENT flag in
the call to
rtr_open_channel( )
servers. By default a server may have other concurrent servers.
/EVENTS=event-nr-list
/NOEVENTS (D)
The /EVENTS qualifier specifies that broadcast events are received on the
channel. To subscribe to all user and RTR events, enter the qualifier with no
arguments. Enter /EVENTS=RTR to receive the full range of RTR events only.
Enter /EVENTS=USER to receive the full range of USER events only. Specify
particular ranges of event numbers using arguments in the following format:
/EVENTS=(RTR,
, TO,
n
where
,
,
and
are event numbers. The default is to listen to no events.
n
m
p
q
CALL RTR_OPEN_CHANNEL
. The channel is opened as a backend call-out
is specified then the command is executed on the
SET ENVIRONMENT
command. If no
, and the server may not be concurrent with other
, USER,
, TO,
)
m
p
q
parameter
flags
SET ENVIRONMENT
RTR Command Line Interface 6–17
Advertisement
Table of Contents
