Compaq AA-Q88CE-TE System Manager's Manual page 112

CALL RTR_REQUEST_INFO
Qualifiers
/CHANNEL_NAME=channel_name
/CHANNEL_NAME=RTR$DEFAULT_CHANNEL
Specifies the channel for which the operation is to be performed.
The command server uses a combination of the channel_name and the window
from which the call was issued to uniquely identify which channel to use.
channel_name
The default channel name is RTR$DEFAULT_CHANNEL.
/CLUSTER
/NOCLUSTER (D)
Specifies that the command is executed on all the nodes in the cluster.
If neither
nodes specified by the latest
command has been entered then the command is executed only on the node where
the command was issued.
Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/GETITM=item-name[,item-name...]
No default
Specifies the
/INFCLA=infoclass
No default
Specifies the
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
/OUTPUT
/SELITM=item-name
No default
Specifies the
/SELVAL=item-value
No default
Specifies the
6–36 RTR Command Line Interface
is not case sensitive.
/NODE nor /CLUSTER is specified then the command is executed on the
SET ENVIRONMENT
parameter in the
getitm
infcla parameter in the
is omitted then the command is executed only on the node where the
or is omitted then the standard or default output is used.
file-spec
parameter in the
selitm
parameter in the
selval
command. If no
call.
rtr_request_info( )
rtr_request_info( ) call.
file-spec
call.
rtr_request_info( )
call.
rtr_request_info( )
SET ENVIRONMENT
. If
node-list
. If