Compaq AA-Q88CE-TE System Manager's Manual page 251

The default value of
page-file
/LINKS and /PROCESSES.
/PRCLM=subprocess-limit
/PRCLM=10 (D)
Specifies the maximum number of subprocesses that the RTR ACP can create.
The default for
subprocess-limit
/PRIORITY=priority
/PRIORITY=6 (D)
Requires alter priority (ALTPRI) privilege to set the priority higher than your
current process.
Specifies the base priority at which the RTR ACP executes.
The priority value is a decimal number from 0 through 31, where 31 is the
highest priority and 0 is the lowest. Normal priorities range from 0 through 15;
real-time priorities range from 16 through 31.
Higher priorities result in faster response, but lower priorities may be more CPU
efficient and give a higher overall throughput.
/PROCESSES=max-processes
/PROCESSES=64 (D)
Specifies the maximum number of processes that can use RTR on this node. The
max-processes value is set to the maximum number of processes allowed by
OpenVMS. The default is 64.
/TQELM=queue-limit
/TQELM=2000 (D)
Specifies the maximum number of timer queue entries that the RTR ACP can
have outstanding at any one time. This number includes timer requests and
scheduled wakeup requests.
The default for
queue-limit
/WSDEFAULT=working-set
/WSDEFAULT=2000 (D)
Specifies the default working set size for the image running in the RTR ACP.
working-set cannot be greater than the working set quota (specified with the
/WSQUOTA qualifier).
The default for
working-set
/WSEXTENT=extent
/WSEXTENT=20,000 (D)
Specifies the maximum size to which the image running in the RTR ACP can
increase its physical memory size.
The default for
extent
/WSQUOTA=max-working-set
/WSQUOTA=10,000 (D)
Specifies the maximum size to which the image being executed in the RTR ACP
process can increase its working set size.
The default for
max-working-set
is automatically calculated, based on the values of
is 10.
is 2000.
is 2000.
is 20,000.
is 10,000 pages.
START RTR
RTR Command Line Interface 6–175