Call Rtr_Receive_Message; Parameters For Rtr_Receive_Message - Compaq AA-Q88CE-TE System Manager's Manual

CALL RTR_RECEIVE_MESSAGE

The CALL RTR_RECEIVE_MESSAGE command causes a command server to
execute the
Format
CALL RTR_RECEIVE_MESSAGE
Command Qualifiers
/CHANNEL_NAME=channel-name
/CLUSTER
/NODE[=node-list]
/OUTPUT[=file-spec]
/TIMEOUT_MS=timoutms
Description
The CALL RTR_RECEIVE_MESSAGE command causes a command server to
call the
line.
The numeric status returned from the call is then converted to its textual
representation and displayed.
The
rtr_receive_message( )
Programmer's Reference Manual.
The prototype of
Table 6–9 shows the correspondence between values you supply on the command
line and the C language parameter values produced and used for the call.
Table 6–9 Parameters for rtr_receive_message
C Parameter Name C Parameter Value
pchannel
flags RTR_NO_FLAGS
prcvchan
pmsg
maxlen RTR_MAX_MSGLEN
timoutms
pmsgsb
rtr_receive_message( )
rtr_receive_message( )
routine itself is described in Application
rtr_receive_message( )
rtr_status_t rtr_receive_message (
rtr_channel_t
rtr_rcv_flag_t
rtr_channel_t
rtr_msgbuf_t
rtr_msglen_t
rtr_timout_t
rtr_msgsb_t
) ;
CALL RTR_RECEIVE_MESSAGE
routine and to display the returned status.
Defaults
/CHANNEL_NAME=RTR$DEFAULT_CHANNEL
/NOCLUSTER
/NODE=default-node-list
/OUTPUT=stdout
/TIMEOUT_MS=infinite
routine using values supplied on the command
is:
*pchannel,
flags,
*prcvchan,
pmsg,
maxlen,
timoutms,
*pmsgsb
Command Line Specification
[displayed]
[none] [D]
/CHANNEL=channel_name
[message displayed, if any]
[reasonable limit for display]
/TIMEOUT_MS=timoutms
[relevant fields displayed]
RTR Command Line Interface 6–25