Compaq AA-Q88CE-TE System Manager's Manual page 295

%RTR-E-NUMCONILL, Numeric constant has illegal syntax, [A]
Explanation: The numeric constant [A] is invalid.
%RTR-W-OBSQUAL, Qualifier [A] is obsolete - value ignored
Explanation: An obsolete qualifier has been specified on a command line.
The qualifier no longer has any effect, and the specified value will be ignored.
%RTR-E-ONLONENOD, Only one node allowed if process ID specified
Explanation: If a process ID is supplied on "MONITOR" command then only
one node may be monitored.
%RTR-E-ONLYDISP, Only "DISPLAY" command allowed in this context
n[A]
Explanation: The specified display file contained a command [A] other
than "DISPLAY". This is sometimes caused by forgetting the continuation
character ("-") on the end of a line that is to be continued. Use MONITOR
/VERIFY to find the incorrect command.
%RTR-W-OPENVMSQUAL, Qualifier [A] is not supported on this platform -
value ignored
Explanation: A qualifier has been specified on a command line that is
effective only on the OpenVMS operating system. The qualifier has no effect
on the executing platform, and the specified value will be ignored.
%RTR-I-OPTSUPSED, The RTR V2.x option [A] is obsolete in V3.x
Explanation: The option is obsolete in this version of RTR.
%RTR-E-OWNNODMIS, Executing node [A] not specified as frontend, backend
or router
Explanation: The node [A] where a "CREATE FACILITY" or "EXTEND
FACILITY" command was executed was not specified as being a frontend,
router or backend.
%RTR-F-PARMDEL, Invalid parameter delimiter - check use of special
characters
n [A]
Explanation: A command contains an invalid character following the
specification of a parameter, or an invalid character is present in a file
specification.
%RTR-F-PARREQ, Missing parameter - supply required parameter
n [A]
Explanation: Missing parameter.
%RTR-E-PARTNAMELONG, Partition name too long
Explanation: Long partition name argument.
%RTR-E-PROCIDILL, Illegal process ID, [A]
Explanation: The specified process ID [A] has an invalid format. Process
ID's are hexadecimal numbers with up to eight digits.
RTR Utility Error Messages
RTR Utility Error Messages D–19