Compaq AA-Q88CE-TE System Manager's Manual page 169

is a list of
Backend-list
than one backend-node
is either the name of a node or
Backend-node
specifies a file containing a
/BALANCE
/NOBALANCE (D)
Specifies that load balancing is enabled for frontend/router connections across the
facility.
In order for load balancing to function correctly, /BALANCE must be defined on
all routers, as well as on those frontends requiring load balancing.
It has no significance on a backend node, and will be ignored if specified.
The default behavior (/NOBALANCE) is for a frontend to connect to the
preferred Router . Preferred routers are defined by the order specified in
the /ROUTER qualifier of the EXTEND FACILITY command. Note that this
preference is subject to the router being available and quorate.
For more details on frontend load balancing, see Section 2.6, Router Load
Balancing.
/CALL_OUT[=role-list]
/NOCALL_OUT (D)
Specifies which node types are to have
is a comma separated list of
Role-list
one role then it must be enclosed in parentheses.
is one of the keywords
Role
The default for role-list
/CLUSTER
/NOCLUSTER (D)
Specifies that the command is executed on all the nodes in the cluster.
If neither nor
/NODE /CLUSTER
nodes specified by the latest
command has been entered then the command is executed only on the node where
the command was issued.
Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/FRONTEND=frontend-list
/NOFRONTEND (D)
Specifies the names of the added nodes that act as frontends in this facility.
is a list of
Frontend-list
than one
frontend-node
is either the name of a node or
Frontend-node
specifies a text file containing a
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list is omitted then the command is executed only on the node where the
command was issued.
separated by commas. If there is more
backend-nodes
, then backend-list must be enclosed in parentheses.
on each line.
backend-list
call-out
. If
roles
or
ROUTER BACKEND
is (ROUTER,BACKEND)
is specified then the command is executed on the
command. If no
SET ENVIRONMENT
separated by commas. If there is more
frontend-nodes
, then
frontend-list
frontend-list
EXTEND FACILITY
, where
@file-spec file-spec
servers running on them.
contains more than
role-list
.
.
SET ENVIRONMENT
must be enclosed in parentheses.
, where
@file-spec file-spec
on each line.
node-list
RTR Command Line Interface 6–93
. If