Table of Contents
Advertisement
/FULL
Equivalent to specifying
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
/OUTPUT
/STATE
/NOSTATE (D)
Specifies that a detailed status of the specified link(s) is displayed.
Related Commands
•
SET LINK
•
CREATE FACILITY
•
SHOW FACILITY/LINK
Example
RTR> SHOW LINK/FULL IRON
Links:
To Node:
Status:-
Outgoing message sequence nr:
Current receive buffer size:
Current number of link users:
Write buffer full, may be sent:
I/O error detected in write:
Pipe temporarily blocked:
Write issued, not completed:
Node initiated the connection:
Connection in progress:
Link is in disabled state:
Facilities:-
In facility:
Frontend:
Router -> Frontend:
This example shows
•
The name and network address of the partner node.
•
Link status.
•
Name of facility using this link and how the link is used in the facility.
/FACILITY/STATE
is omitted then the command is executed only on the node where the
or
is omitted then the standard or default output is used.
file-spec
no
Router:
no
Frontend -> Router: yes
Backend -> Router:
Router quorate:
Router current:
.
iron
Address:
22
Incoming message sequence nr:
2048
Current transmit buffer size:
1
Write buffer timed out:
no
Write buffer allocated:
no
I/O error detected in read:
no
Connection broken:
no
Read is pending:
yes
Connection established:
no
Node is configured:
no
Link may be suspect:
steve2
yes
no
no
yes
RTR Command Line Interface 6–145
SHOW LINK
. If
node-list
. If
file-spec
iron.zuo.dec.com
22
2048
no
yes
no
no
yes
yes
yes
no
Backend:
no
Router ->Backend:
no
Backend quorate:
no
Backend coordinator:no
Advertisement
Table of Contents
