SHOW RESOURCE MANAGER (SHOW RM)
/FULL
/NOFULL (D)
Displays additional information for facilities that reference a particular RM. If no
rmi_name is included, displays information for all RMs.
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
/OUTPUT
Related Commands
•
REGISTER RESOURCE MANAGER
•
UNREGISTER RESOURCE MANAGER
Examples
RTR> SHOW RM rmi_1 /full
Resource Manager:
RMI Name
RMID
XA Switch
Library path
Facilities associated with this RM: Nashua
6–160 RTR Command Line Interface
is omitted then the command is executed only on the node where the
or
is omitted then the standard or default output is used.
file-spec
: Nashua
: yyy
: xaosw
: zzz
. If
node-list
file-spec
. If