Compaq AA-Q88CE-TE System Manager's Manual page 195

/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
/OUTPUT
Related Commands
• SHOW MODE
Examples
RTR> SET MODE/GROUP
This command tells RTR to enter
RTR> SET MODE/NOGROUP
This command tells RTR to enter
is omitted then the command is executed only on the node where the
or is omitted then the standard or default output is used.
file-spec
mode.
GROUP
mode.
NOGROUP
RTR Command Line Interface 6–119
SET MODE
. If
node-list
file-spec . If