Compaq AA-Q88CE-TE System Manager's Manual page 214

SHOW FACILITY
On a frontend, this qualifier can be used to find out whether the node is currently
connected to a router.
Related Commands
•
CREATE FACILITY
• DELETE FACILITY
•
SHOW LINK
Examples
RTR> SHOW FACILITY/FULL/NODE=BRONZE
Facility:
Configuration:-
Frontend:
State:-
FE -> TR:
Links:-
Link to:
Frontend:
Router -> Frontend:no
Link to:
Frontend:
Router -> Frontend:yes Frontend -> Router:
Show all facilities in detail.
1
The facility's name.
2
The facility's configured roles on this node. In this example, the node is a
3
router and a backend; load balancing, router callouts and backend callouts
are not enabled.
The facility's state. The router and backend roles are quorate. (Quorate
4
means that this node's view of the availability of the other nodes in the
configuration matches that of the other backends and routers. A facility that
is not in the quorate state is effectively unusable.) The quorum threshold is
at the default (zero) and no minimum broadcast rate has been set.
6–138 RTR Command Line Interface
FUNDS_TRANSFER
2
3
no Router:
Router call-out:
Load balance:
4
unused Router quorate:
Quorum threshold:
5
bronze
no Router:
Frontend -> Router:
Backend -> Router:
Router quorate:
Router current:
airola
yes Router:
Backend -> Router:
Router quorate:
Router current:
1
yes Backend:
no Backend call-out:
no Quorum-check off:
yes Backend quorate:
0 Min broadcast rate:
yes Backend:
no
yes Router -> Backend: yes
yes Backend quorate:
no Backend coordinator:yes
6
no Backend:
no
no Router -> Backend:
no Backend quorate:
no Backend coordinator: no
yes
no
no
yes
0
yes
yes
no
no
no