Compaq AA-Q88CE-TE System Manager's Manual page 289

%RTR-S-JOURNALINI, Journal has been created on device [A]
Explanation: Confirms that the RTR journal has been successfully created
on device [A] after issuing the "CREATE JOURNAL" command.
%RTR-S-JOURNALMOD, Journal has been modified on device [A]
Explanation: Confirms that the RTR journal has successfully modified
the size requirements on device [A] after issuing the "MODIFY JOURNAL"
command.
%RTR-E-KEYTYPEVAL, Key type value for [A] missing - try one of string,
signed, unsigned
Explanation: The type clause of the key qualifier requires a value - try one
of string, signed, unsigned.
%RTR-F-KNLEXECFAIL, Knl_exec( ) delivered pid of 0 (starting [A]) on node
[A][A]
Explanation: Indicates that knl_exec( ) failed, when trying to start a
command server.
%RTR-E-KRINUSE, Key range already in use - respecify the key
Explanation: A call to rtr_open_channel( ) to create a partition specified a
key range that is already in use. Respecify the key range.
%RTR-E-KRINUSEINJNL, Journalled transactions preclude change of partition
name
Explanation: Transactions exist in the journal that were processed whilst
this key range was assigned a different name. This equates to an attempt
to change the partition name, which is not allowed. Recover or delete these
transactions first.
%RTR-I-LFILREOPE, Log_file[[A]] [A] reopened
Explanation: Log file [A] re-opened.
%RTR-E-LINKDISABLED, Link disabled - connection rejected
Explanation: The link to this node has been disabled at the remote partner.
It can be enabled with the command 'set link/enable' at the remote node.
%RTR-I-LIVEAPPL, Process [A], PID [A] still attached to RTR
Explanation: Displays the name [A] and PID [B] of the processes that are
still attached to RTR.
%RTR-I-LNKDSC, Link to node [A] disconnected
Explanation: This message is issued once per disconnected network link
during the execution of the RTR DISCONNECT LINK command.
%RTR-E-LOADLIBFAIL, Unable to dynamically load the shared library
Explanation: The RTR ACP was unable to load the shared library
dynamically.
%RTR-E-LOADSYMFAIL, Unable to find the symbol in the shared library
Explanation: The RTR ACP was unable to locate the symbol name in the
lib.
RTR Utility Error Messages
RTR Utility Error Messages D–13