Modifying The Cooking Program - Henny Penny FlexFusion FPG-615 Operator's Manual

6.10.5
Requirement
Requirement
NOTICE
If the cooking zone door is not opened, the fan continues to run at a low
speed at intervals. This achieves even cooking.

Modifying the cooking program

NOTICE
Tabs available only within cooking programs. Tapping the tabs provides
faster access to their functions.
NOTICE
The current step in the cooking program is highlighted and can be modified.
All settings of a step can be modified.
NOTICE
After the settings are made, the modified cooking program can be saved.
The cooking program is overwritten if a new cooking program name is not
specified.
Modifying a cooking program after the program has started
➢ Cooking program started
➢ Cooking program has not elapsed
a) Modify the settings for the current step.
⇨ The modifications of the step become active immediately.
⇨ The modifications of the step are displayed.
b) Tap the "Continue" field.
⇨ The active step is being ended.
⇨ The next step is being started.
⇨ Steps advance in the
⇨ The cooking program is modified.
Modifying a cooking program before the program has started
➢ Cooking program open
➢ Cooking program not started
a) Modify various steps.
b) Use a wiping gesture to reach the individual step to be modified.
c) Modify the settings for the step.
Automatic cooking (autoChef)
Settings
window.
Operating the unit
6
65