Advertisement
6.
Rotate the latches and remove the side cover on
the armrest
(Figure
Figure 4
1. Cover
7.
Install the 10 A fuse into the fuse block as shown
in
Figure
5.
4).
1. Installed 10 A fuse
g333069
8.
Install the cover and secure it with the latches.
4
Connecting the Battery
No Parts Required
Procedure
WARNING
Electrical sparks can cause the battery gasses
to explode, resulting in personal injury.
Incorrect battery cable routing could damage
the machine and cables, causing sparks.
• Always disconnect the negative (black)
battery cable before disconnecting the
positive (red) cable.
• Always connect the positive (red) battery
cable before connecting the negative
(black) cable.
1.
Connect the positive cable to the battery and
tighten the battery-clamp nut
4
Figure 5
(Figure
6).
g333070
Advertisement
