Installing The Hoses - Toro Maxi Sneaker 370 Operator's Manual

3

Installing the Hoses

Installing the Motor and Plow Hoses
Parts Required
1
1
1
1
1
Figure 1
1. Connect the 54-inch hose
connector on the motor.
2. Connect the 53-inch hose
connector on the motor.
3. Secure the hoses to the inside of the frame
with the P-clamp
4. Remove the left hood.
Installation: Installing the Hoses
54-inch hydraulic hose
53-inch hydraulic hose
P-Clamp
Bolt (5/16 x 1 inch)
Nut (5/16 inch)
Routing Overview
to the top
to the lower
.
G434138
G434135
Page 2–5 3462-340 A