Using Emp Monitor; Opening And Closing Emp Monitor - Epson PowerLite 1825 User Manual

Using EMP Monitor

EMP Monitor lets you use a remote computer to manage your
projectors, whether connected wirelessly or over a wired network. It
lets you easily turn the projectors on or off (together or individually),
switch image sources, and check their status.
Before using EMP Monitor, make sure you've installed the software
(available for Windows only) as described on page 201. The
computer you're using to monitor the projector should already
be connected to your network.

Opening and Closing EMP Monitor

To start EMP Monitor, click
EPSON Projector > EMP Monitor
If you've added the program to the Startup programs folder, then it
may already be open. If so, click the icon in the system tray on the
lower-right corner of your screen to display the EMP Monitor
window:
To close EMP Monitor, select
the program icon shown above, then select
or
Start > Programs All Programs >
.
Click here to start EMP Monitor
from the File menu or right-click
Exit
.
Exit
note
If you want to monitor
projectors while they are
in standby mode, select
in the
Standby Mode
Extended menu, then
select .
Network On
See page 150.
Managing Projectors
157