Using Emp Monitor; Opening And Closing Emp Monitor; Registering A Projector - Epson PowerLite 8300NL User Manual

Using EMP Monitor

EMP Monitor lets you manage up to 64 projectors from a remote
computer. This lets you easily turn the projectors on or off (together
or individually), switch image sources, and check on their status.
Before using EMP Monitor, make sure you've installed the software as
described on page 74. The computer you're using to monitor the
projector should already be connected to your network.

Opening and Closing EMP Monitor

To open the program, select from the Start menu.
EMP Monitor
If you've added the program to the Startup programs folder (see
page 83), then it may already be open. If so, click the icon in the
system tray on the lower-right corner of your screen to display the
EMP Monitor window:
Click here to open monitor window
To close EMP Monitor, right-click the program icon shown above,
then select .
Exit

Registering a Projector

Before you can monitor a projector, you have to register it. Follow
these steps:
1. Open EMP Monitor as described above. You see this screen:
Click here
Managing the Projector from a Remote Computer
78