Using Via Raid Bios Setup To Change Array Mode - SOLTEK SL-PT880E-R Manual

SL-PT880E-R/PT880E-RL

5-5 Using VIA RAID BIOS Setup to change Array mode

(5-5-1) If you wants to change the RAID mode, say, from RAID 0 to
RAID 1, you must return to the Initial RAID BIOS Setup screen. Then,
press the "Arrow" key to mark the "Delete Array" bar and press <Enter>.
(5-5-2) Instantly, the Bootable Hard Disk(s) is marked up for deletion.
Press <Enter> key on this screen to delete the set-up array.
96