Table of Contents
Advertisement
3-4 Install USB 2.0 Driver for Win98 / Me / 2000 / XP
VIA USB V2,0is already integrated on board. Its 480Mb/s transfer rate
supports operating system Win98/Me/2000/XP. USB Driver installa-
tion procedures are of similar steps in these systems. Please take the
following illustrations from Win XP as the USB driver installation guide:
1. Following the procedures of opening the Support CD, click to
"Motherboard Drivers" and then choose "VIA USB 2.0 Driver" to
proceed. Please notice that the USB card driver is different from the
USB 2.0 driver typically for the on-board USB. Do not use the USB
card driver here.
2. Instantly the "USB 2.0 Setup Program" will pop up on screen. Click
"Next" to continue.
Chapter 3 Software Setup
Next
45
Advertisement
Table of Contents
