Install Usb 2.0 Driver For Win2000 Or Winxp - SOLTEK SL-85MR2 Manual

85MR2 / 85MR2-L

3-9 Install USB 2.0 Driver for Win2000 or WinXP

USB V2,0 with its 480Mb/s transfer rate supports operating system
Win2000 and WinXP (It does not support Win9X and Win ME systems).
USB Driver installation procedures are of similar steps in Win2000 and
WinXP. The point is we must take the correct path to find out the loca-
tion of the proper driver. Please take the following illustrations as the
USB driver installation guide:
1. In Win2000or WinXP, insert the Support CD into CD-ROM drive D
(supposing the CD-ROM drive is "D").
2. Take the following path to search for the USB 2.0 driver for installation:
\My Computer(right click of Mouse)\Properties\
Hardware\Device Manager\
Universal Serial Bus(USB) Controller (left double click of Mouse)\
Driver\Update Driver\
3. Instantly the "Upgrade Device Driver Wizard" will show up on screen.
Click "Next" to continue.
4. Instantly, the Wizard Program will guide you through to search for
the USB driver.
5. On the following "Upgrade Device Driver Wizard" screen, Tick "Specify
a Location" and mouse click "Next" button to continue.
Specify the driver location
in "Win2000".
Specify the driver location
in "WinXP".
54