Table of Contents
Advertisement
SL-B9D-FGR
2-4 IDE Connector Installation
IDE1 and IDE2 are 2 IDE connectors supporting 4 IDE devices for up to
133MB/s data transfer.
80-conductor IDE Cable
(for 2 IDE devices)
This kind of cable is dedicated for Mini-
barebone system because the ribbon is
bundled up and will not block the air
flow in the barebone cabinet.
Gray connector
(To slave device)
Red line
Black connector
(To Master Device)
Socket 939
IDE1/2: ATA IDE connectors
Orient the red line on the IDE
Flat Cable to Pin1.
Blue connector
(To Mainboard)
Chapter 2 Hardware Setup
SATA1
SATA2
Pin 1 (to Red Line of IDE cable)
80-conductor IDE Cable
(dedicated for 1 IDE device)
This kind of cable is dedicated for Mini-
barebone system because the ribbon is
bundled up and will not block the air
flow in the barebone cabinet.
Bundle Strap
80-conductor
IDE cable
Blue connector
(To Mainboard)
20
IDE2
IDE1
Red line
Black connector
(To Master Device)
Advertisement
Table of Contents
