4-6.9 Frequency/Voltage Control - SOLTEK SL-B9D-FGR Manual

SL-B9D-FGR

4-6.9 Frequency/Voltage Control

Choose "Frequency/Voltage Control" from the Main Menu and a screen
with a list of options will appear:
CPU Ratio
Auto Detect PCI Clk
Spread Spectrum
Async AGP/PCI clock
CPU Clock
CPU Vcore Select
AGP Voltage Select
DIMM Voltage Select
: Move Enter: Select
F5: Previous Values
CPU Ratio To select the CPU clock ratio.
Auto Detect PCI
Spectrum
Async AGP/PCI
CPU Clock This item allows you to set CPU Clock.
CPU Vcore
AGP Voltage
DIMM Voltage
Phoenix - AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
StartUp
Enabled
Disabled
Enabled
200MHz
Default
Default
Default
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Choices: Startup; 200MHz x4~25;
To enable / disablethis auto detection function on
Clock PCI clock.
Spread This function will reduce the EMI (Electromagnetic
Interference) in your system. If you do not have an
EMI problem, leave this item disabled.
To enable / disablethis Asynchronous AGP/PCI
clock
clock.
Choices: 200MHz ~250MHz in 1MHz stepping.
(Key in a decimal number to select CPU clock.)
To configure the CPU Voltage. Usually, to raise CPU
Select voltage will raise the chance of CPU overclocking
and yet risk damage of CPU.
Choices: Default;
To configure the AGP Voltage.
Select Choices: 1.5V; 1.6V; 1.7V; 1.8V
To configure the DIMM Voltage.
Select Choices: 2.6V; 2.7V; 2.8V; 2.9V
0.800V ~1.700V in 0.25V stepping
77
Chapter 4 BIOS Setup
Item Help
Esc: Exit F1: General Help
F7: Optimized Defaults