Table of Contents
Advertisement
SL-B9D-FGR
1-4.9 Multi-I/O Functions
• PCI EIDE Controller, supporting:
-- 2 ATA 133 / 100 / 66 IDE connectors supporting up to 4 IDE devices
• Dedicated IR Functions:
-- 1x5 IR connector dedicated to IR function with Infrared-IrDA (HPSIR)
and ASK (Amplitude Shift Keyed) IR
• Multi-mode parallel data transfer:
-- Standard mode, high speed mode ECP and enhanced mode EPP
• Floppy Drive Connector:
-- 1 FDD connector supporting 1 floppy drive for barebone system
• Universal Serial Bus Transfer Mode:
-- USB V2.0 compliant, 480 Mb/s USB Bus, supporting Windows 98 and
later operating systems; USB drivers provided in Support CD for installation
-- 4 built-in USB connectors and 2 more USB pin-headers which require 2
optional USB cables to provide 4 more USB ports
• PS/2 Keyboard and PS/2 Mouse
• UARTs (Universal Asynchronous Receiver / Transmitter):
-- 2 complete serial ports (COM1 & COM2) on board.
1-4.10 SATA / SATA RAID Interface
Serial ATA / RAID Interface supported by VT8237:
• Supporting 2 Serial ATA / SATA RAID connectors for 2 SATA Hard
Disks with 150Mb/s transfer rate
• Serial ATA RAID Drivers enclosed in Support CD/Floppy Diskette for
user's installation
1-4.11 Hardware Monitor on board
• Hardware Monitor integrated in LPC I/O W83687THF, providing moni-
toring functions on hardware voltage, temperatures and fan speeds.
• Utility Software Soltek Hardware Monitor for displaying monitor sta-
tus is enclosed in Support CD for user's installation.
1-4.12 Gigabit Ethernet on board
PCI local bus single-chip Gigabit Ethernet Controller RTL8110S on
board:
• Supporting 10/100/1000Mb data transfer
• Supporting Wake On LAN function through the on-board RJ45 LAN
Connector
1-4.13 Form Factor
• ATX Power Supply
• Mainboard size: 180mm x 270mm
Chapter 1 Specification
14
Advertisement
Table of Contents
