Table of Contents
Advertisement
SL-B9D-FGR
6. Place down the cooling fan into
Fan Base.
Support Groove must
be facing the DIMM
slot side so as to turn
down without PCI/AGP
card barrier.
8 . N o w p u s h 4 b u c k l e s i n t o
position.
Buckle
10. The cooling fan is now set up. Check that the Latch,
the 4 buckles, and the Power Connector are all in
proper position.
The DIMM slot
The Latch should
only be able to
turn down this
direction.
Buckle
Chapter 2 Hardware Setup
7 . N o w c o n n e c t t h e P o w e r
connector to the onboard CPU
Fan connector.
CPU Fan
AGP
Power connector
slot
Fan Power Cable
must be set facing
the AGP/PCI side.
9. Now press down Latch to a
horizontal position
17
Advertisement
Table of Contents
