3-4.2 Verifying 8-Channel Audio - SOLTEK SL-B9D-FGR Manual

SL-B9D-FGR

3-4.2 Verifying 8-channel Audio

After installation of AC'97 8-channel Codec, you must configure the 7.1
Speaker connection to enable the 8-channel audio.
1. Connect your on-board Audio Connector to your 8-channel speakers
as depicted in the figure below:
Orange Connector
Center/ Subwoofer
Speaker Out
Black Connector
To Rear Speaker Out
2. After Connection is done, start your Windows system and double
click the Sound manager icon to enter 8-channel configuration:
Back Panel Audio Connectors
41
Chapter 3 Software Setup
Line In
Gray Connector
to Side Speaker
Light Green Connector
to Front Speaker
Sound Effect
Manager icon on
Windows XP