Table of Contents
Advertisement
SL-B9D-FGR
Step 4. Type awdflash *.bin /sn/py/cc and then press <Enter> to run
BIOS upgrade program. (*.bin depends on your mainboard model and
version code. Instead of typing "*", you should type specific file name
for your specific mainboard).
Step 5. Please press <F1> or <F10> to exit or reset your system.
Warning ! If the message " Write Fail " appears while AWARD "FLASH
MEMORY WRITER" is verifying Flash memory,please retry the process.
Please DO NOT turn off the system before updating the BIOS
successfully.
Step 6. At rebooting system, press <Del> to run CMOS setup utility,
then reload "LOAD SETUP DEFAULTS" or "Load Optimized Defaults"
and save this change.
The parameters of AWDFLASH.EXE
/sn: No original BIOS backup
/py: Program flash memory
/cc: Clear CMOS data (and update data automatically) after pro-
gramming
NOTE: Users can type AWDFLASH /? to get further details about
the parameters. Incorrect usage of the parameter will dam-
age the BIOS information, so we strongly recommend users
to leave parameters alone unless you fully understand their
function.
53
Chapter 4 BIOS Setup
Advertisement
Table of Contents
