Ejecting Paper; For Roll Paper; For Cut Sheet Media - Epson Stylus Pro 9860 User Manual

Epson Stylus Pro 9860

Ejecting Paper

This section explains how to eject paper after printing.
Note:
When you use the paper basket, see the following section.
"Using the paper basket and paper guides" on
page 36
When you use optional Auto Take-up Reel Unit, see the
following section.
"Using Auto Take-up Reel Unit" on page 40

For roll paper

See the following section to cut the roll paper.
"Cutting the roll paper" on page 29

For cut sheet media

A
When printing is complete, the printer supports
the printed media, and PAPER OUT. LOAD
PAPER is displayed on the LCD panel.
If READY appears on the LCD panel, press the
button to feed the paper.
Caution:
c
Do not press any buttons when the Power
light or the Pause light is flashing.
User's Guide
Paper Handling
B
Press the button to remove the paper.
Caution:
c
The paper may fall after ejecting. Be sure to
hold the paper to avoid falling and
damaging the paper.
35