Supported Media Sizes For Borderless Printing - Epson Stylus Photo R3000 User Manual

Epson Stylus Photo R3000
- Make the image data as large as the paper size.
Retain Size[PrnDriver]
Create the print data larger than the paper size in the
applications to produce borderless output. The printer
driver does not enlarge the image data. Use settings such
as Page Layout in the applications to set the size of the
image data as follows.
Page settings can be set larger than the paper size by the
amounts shown below.
Sizes larger than A4
A4 or smaller (excluding 100 × 148
mm, 9 × 13 cm/3.5 × 5 in., 10 × 15
cm/4 × 6 in.)
100 × 148 mm, 9 × 13 cm/3.5 × 5 in.,
10 × 15 cm/4 × 6 in.
- If the application has margin settings, set the
margins to 0 mm.
- Make the image data as large as the paper size.
- There is no need to increase the top and bottom sizes
for roll paper.
User's Guide
Printing Varieties
Top: +3 mm
Bottom: +4.5 mm
Left and right: 3.5
mm
Top: +3 mm
Bottom: +4 mm
Left and right: 2.5
mm
Top: +1.3 mm
Bottom, left, and
right: 2.5 mm
Select this setting if you want to avoid image
enlargement by the printer driver.
Supported Media Sizes for
Borderless Printing
The following media sizes are supported for borderless
printing.
Supported paper sizes
A4 (210 × 297 mm)
A3 (297 × 420 mm)
A3+ (329 × 483 mm)
Letter (8½ × 11 in.)
100 × 148 mm
9 × 13 cm (3.5 × 5 in.)
10 × 15 cm (4 × 6 in.)
13 × 18 cm (5 × 7 in.)
13 × 20 cm (5 × 8 in.)
16 : 9 wide (102 × 181 mm)
20 × 25 cm (8 × 10 in.)
254 × 305 mm (10 × 12 in.)
279 × 356 mm (11 × 14 in.)
US B 11 × 17 in.
30 × 30 cm (12 × 12 in.)
A3+ roll paper (329 mm wide)
60